[English Below]
Download tool: https://www.mediafire.com/folder/h16ylhsmkdh0p/LPRO_AIO
Video: https://www.youtube.com/watch?v=SoLrqiIgwm0
Video: https://youtu.be/75Z5YTWhEtk
Requirement: need cable DCSD iphone and flow step on tutorial
Dịch vụ này dùng để bypass iOS15 không cần jailbreak nhưng chỉ xài WIFI, không nghe gọi sms
Yêu cầu phải có cáp DCSD để làm
- iCloud và Appstore hoạt động tốt sau khi bypass, Tuy nhiên sẽ có 1 số máy thông báo không hoạt động sẽ được fix trong bản cập nhật tiếp theo
1. Mở tool lên đưa máy về DFU kết nối vào
2. Copy ECID từ LPro dán vào BeeUnlock và bấm Submit
-------------------------------------
Bypass iOS15 without jailbreak and NO SIGNAL, use WIFI ONLY
Phone will support iCloud login and AppStore
DCSD Cable need for this operation
1. Open tool and put phone in DFU Mode
2. Copy ECID from LPro and submit
NEW UPDATE DOESNT REQUIRE DCSD - NO NEED DCSD for A10/A11 Devices Only.
Guide (AUTO METHOD ONLY) :
Step 1: Connect Device in "RECOVERY MODE"
Step 2: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 3: Click "Purple Mode" Button
This Step NO NEED DCSD for iPhone 7-X (A10/A11)
DCSD for iPads and iPhone 6s, 6s Plus Needed
After Successful Write, Device Automatically Enters Recovery Mode
Step 4: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 5: Click "Run PwnDFU" Button
Step 6: Click "Boot Device" Button
Step 7: Click "Check SSH"
(Wait for the Button to light up to become this Check SSH )
Step 8: Click "HELLO BYPASS"
Wait for the Device to turn on and the Device is Successfully Activated
—————————————————————
Guide (MANUAL METHOD ONLY) :
Step 1: Connect Device in "NORMAL MODE"
It Will Show Serial To Change Manually
Step 2: Connect Device in "RECOVERY MODE"
Step 3: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 4: Click "Purple Mode" Button
You Can Connect DCSD Now and Click OK or Click Close.
Click Close and Connect DCSD Cable for Manual Methods
Step 5: Open MagicCFG or Any Tool to Edit Serial You Copied in Step 1
PLEASE VERIFY IF SERIAL CHANGED SUCCESSFULLY and Proceed Next Step Carefully. Read Device info in Normal Mode to verify Serial Change.
Step 6: Click "Hello Bypass" Button in Normal MODE FIRST (DO NOT SKIP)
This Checks if Device Data is OK For Bypass. Proceed Next Step After Success Message.
Step 7: Connect Device in "RECOVERY MODE"
Step 8: Use "Boot To DFU Mode" Button to Boot DFU (DO NOT SKIP)
Step 9: Click "Run PwnDFU" Button
Step 10: Click "Boot Device" Button
Step 11: Click "Check SSH"
(Wait for the Button to light up to become this Check SSH )
Step 12: Click "HELLO BYPASS"